Submitted by Anonymous (not verified) on Wed, 10/10/2007 - 01:00
Forums

I have an iSeries 400 and have connected the Internal IBM modem (2761 or 2771) - but it will not dial.

Full name
Administrator

admin

Wed, 10/10/2007 - 01:00

You must make sure, that the country code is set correctly
in "Network Attributes" before you use the internal modem.
Select a OS/400 command line and write:     CHGNETA
Scroll to the last panel
The value in the country code must display the physical location
of the iSeries.
If you read:

     "Modem country ID . . . . . . . . . . . . . . . . :   *SAME"

then press F4=Prompt to select the right country "