Submitted by Anonymous (not verified) on Sat, 01/01/2005 - 00:00
Forums

We have an IP based phone system and have a Cisco ATA 186 Telephone adaptor .
It supports the formats G.711 fax pass-through and G.711 fax mode.

I have tried to connect, but faxes are just sent partly?

Full name
Administrator

admin

Sat, 01/01/2005 - 00:00

Success of fax transmissions up to 14.4 kbps depends on network
conditions and fax modem/fax machine tolerance to those conditions.
Network must have reasonably low network jitter, network delay,
and packet loss rate.

The setup in the Cisco ATA 186 must be "fax mode".

http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_administ…

Also check your IP switchboard. The local number used for the fax line
must also be marked as Fax.